TR CU Certification and TRCU Declaration schemes-technical regulations of the Customs Union

俄罗斯测试认证集团/海关联盟EAC认证中心

Центр сертификации EAC Таможенного союза ?ООО ТЕСТ СЕРТ

上海经合工业设备检测有限公司俄语区域产品认证专家

021-36411223 eac@cu-tr.org WeChat:18621862553

首页 >> 行业资讯 >> TR CU Certification and TRCU Declaration schemes-technical regulations of the Customs Union

TR CU Certification and TRCU Declaration schemes-technical regulations of the Customs Union

来源: | 作者:pmt1ac5e9 | 发布时间 :2019-09-05 | 1287 次浏览: | 分享到:

Certification and declaration schemes

Used for conducting works on conformity acknowledgement of products in accordance with the requirements of technical regulations of the Customs Union

Conformity acknowledgement within the frames of the Customs Union is conducted in accordance with the requirements of technical regulations of the Customs Union (hereinafter — TR CU).
Products that come under the requirements of TR CU are subject to obligatory conformity acknowledgement.
Lists of products that come under the requirements of TR CU are given in the Attachments to TR CU.
Conformity acknowledgement is executed in the form of certification and declaration of conformity.
Based on the results of certification — certificate of conformity is issued certified by conformity acknowledgement organ, based on the results of declaration – declaration of conformity certified by applicant and registered by conformity acknowledgement organ.

Forms (certification and declaration) and schemes of conformity acknowledgement of products are determined by appropriate Technical Regulations of the CU.
Generally the following schemes of certification and declaration are used:

Declaration schemes:

№ Scheme	Basis of declaration	Notes
1) For *the* *shipment* of products
2д	Based on the results of in-house tests of the shipment	Applicant - manufacturer, seller (supplier) of the country – member of the CU or a person on the territory of CU authorized by foreign manufacturer
4д	Based on the results of tests of the shipment by accredited laboratory
2) *For serial production*:
1д	Based on the results of in-house rests of the samples of products and documents confirming production control	Applicant - manufacturer of the country – member of the CU or a person on the territory of CU authorized by foreign manufacturer
3д	Based on the results of tests of the samples of products by accredited laboratory and documents confirming production control
5д	Based on the results of examination (tests) of the types of products and documents confirming production control
6д	Based on the results of tests of the samples of products by accredited laboratory, QM certificate and documents confirming production control

Certification schemes:

№ Scheme	Basis of certification	Notes
1) For *the* *shipment* of products:
3с	For the shipment of products based on the tests of the samples of products	Applicant — *seller (*supplier), manufacturer on condition of availability of authorized person on the territory of the CU
4с	For single product based on the tests of this products
9с	Based on the analysis of the documents (recommended for a limited shipment of products supplied by foreign manufacturer or for complex products intended for equipping the facilities on the territory of the CU)	Applicant — manufacturer on condition of availability of authorized person on the territory of the CU
2) *For serial production*:
1с	Based on the samples tests and analysis of production
2с	Based on the samples tests and quality system certificate
5с	Based of the results of project investigation and analysis of production	Schemes are used for serial production in case it is difficult or impossible to confirm conformity to the requirements during the tests of finished product
6с	Based of the results of project investigation and quality system certificate (Project investigation- analysis of technical documentation used for production, results of calculations, tests of the samples of products)
7с	Based on the results of examination (tests) of the types of products and analysis of production.	For complex products intended for serial or mass production and also in case of planned production of numerous modifications of products
8с	Based on the results of examination (tests) of the types of products and quality system certificate . (Examination of type includes: - examination of the sample of product as standard specimen of products; - analysis of technical documentation, test of sample or critical components of products)
Applicant for serial certification may be legal entity or a physical person registered in the Customs Union as a legal entity or as individual entrepreneur, or manufacturer, or with the functions of foreign manufacturer based on the agreement about the conformity of supplied products and about responsibility for non conformity with the requirements of Technical Regulation. Applicant for shipment of products certification may be legal entity or a physical person registered in the Customs Union as a legal entity or as individual entrepreneur, or manufacturer, or seller or with the functions of foreign manufacturer based on the agreement about the conformity of supplied products and about responsibility for non conformity with the requirements of Technical Regulation.