海关联盟CU-TR认证服务中心

俄罗斯测试认证集团/海关联盟EAC认证中心

Центр сертификации EAC Таможенного союза ?ООО ТЕСТ СЕРТ

上海经合工业设备检测有限公司俄语区域产品认证专家

021-36411223 eac@cu-tr.org WeChat:18621862553

首页 >> 公司新闻 >> EAC符合性声明-TRCU Declaration,Schemes of declaration of compliance for TRCU;1D,2D,3D,4D,5D,6D

EAC符合性声明-TRCU Declaration,Schemes of declaration of compliance for TRCU;1D,2D,3D,4D,5D,6D

来源: | 作者:pmt1ac5e9 | 发布时间 :2019-05-21 | 2243 次浏览: | 分享到:

TRCU declarations,cutr certificate, trcu certificate,CU certificate,Description of typical declaration schemes of conformity according to TRCU,1D declaration scheme

Schemes of declaration of compliance for TRCU

Typical schemes for declaring compliance with TR CU:

Circuit number	Schema element			Application	Document confirming compliance
Circuit number	Product testing, type examination	Production evaluation	Production control	Application	Document confirming compliance
1Д 1D	Tests of product samples are carried out by the manufacturer.	-	Production control is exercised by the manufacturer.	For mass-produced products, the Applicant is a manufacturer of a member state of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union	Declaration of conformity for products manufactured in series
2Д	Testing of the batch of products (single product) is carried out by the applicant	-	-	For a batch of products (single product) the Applicant is a manufacturer, seller (supplier) of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union	Declaration of Conformity for the production batch (single item)
3Д 3D	Testing product samples in an accredited testing laboratory (center)	-	Production control is exercised by the manufacturer.	For mass-produced products, the Applicant is a manufacturer of a member state of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union	Declaration of conformity for products manufactured in series
4Д 4D	Testing of a batch of products (single product) in an accredited testing laboratory (center)	-	-	For a batch of products (single product) the Applicant is a manufacturer, seller (supplier) of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union	Declaration of Conformity for the production batch (single item)
5Д 5D	Research (test) type	-	Production control is exercised by the manufacturer.	For mass-produced products, the Applicant is a manufacturer of a member state of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union	Declaration of conformity for products manufactured in series
6Д 6D	Testing product samples in an accredited testing laboratory (center)	Management System Certification and Inspection Control by a management system certification body	Production control is exercised by the manufacturer.		Declaration of conformity for products manufactured in series

Description of typical declaration schemes of conformity according to TRCU

1D declaration scheme

Scheme 1e includes the following procedures:

- the formation and analysis of technical documentation;

- implementation of production control;

- testing of product samples;

- adoption and registration of a declaration of conformity;

- drawing a single sign of appeal.

The applicant takes all necessary measures to ensure that the production process is stable and ensures that the manufactured products comply with the technical regulations, generates technical documentation and analyzes it.

The applicant provides production control.

In order to control the compliance of products with the requirements of technical regulations, the applicant conducts tests of product samples. Tests of product samples are carried out at the choice of the applicant in a testing laboratory or an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers it according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

2D declaration scheme

Scheme 2D includes the following procedures:

- the formation and analysis of technical documentation;

- testing of the production batch (single item);

- adoption and registration of a declaration of conformity;

- drawing a single sign of appeal.

The applicant generates technical documentation and conducts its analysis.

The applicant conducts testing of product samples (single product) to ensure confirmation of the declared conformity of products with the requirements of technical regulations. Tests of product samples (single product) are conducted at the choice of the applicant in a testing laboratory or an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

3D declaration scheme

Scheme 3d includes the following procedures:

- the formation and analysis of technical documentation;

- implementation of production control;

- testing of product samples;

- adoption and registration of a declaration of conformity;

- drawing a single sign of appeal.

The applicant provides production control.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

4D Declaration scheme

Scheme 4d includes the following procedures:

- the formation and analysis of technical documentation;

- testing of the production batch (single item);

- adoption and registration of a declaration of conformity;

- drawing a single sign of appeal.

The applicant generates technical documentation and conducts its analysis.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

5D Declaration scheme

23.5.1. Scheme 5d includes the following procedures:

- the formation and analysis of technical documentation;

- implementation of production control;

- conducting research (testing) type;

- adoption and registration of a declaration of conformity;

- drawing a single sign of appeal.

23.5.2. The applicant takes all necessary measures to ensure that the production process is stable and ensures the declared compliance of the manufactured products with the requirements of technical regulations, generates technical documentation and analyzes it.

23.5.3. The applicant provides production control.

23.5.4. The product certification body (accredited testing laboratory), in accordance with its scope of accreditation and on behalf of the applicant, conducts a study of the type of products in one of the following ways:

- research sample for the planned production as a typical representative of all future products;

- analysis of technical documentation, testing of product samples or critical components of products.

The results of a type study are recorded in a conclusion (certificate of conformity) and (or) a protocol in which an accredited testing laboratory gives an assessment of the conformity of the type of product to the established requirements.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

6D Declaration scheme

Scheme 6e includes the following procedures:

- formation and analysis of technical documentation, which necessarily includes a certificate for the management system (a copy of the certificate) issued by the certification body of management systems, confirming that the management system meets the requirements defined in the technical regulations;

- implementation of production control;

- testing of product samples;

- adoption and registration of a declaration of conformity;

- drawing a single sign of appeal;

- monitoring the stability of the management system.

The applicant takes all necessary measures to ensure the stability of the management system and production conditions for the manufacture of products that meet the requirements of technical regulations, generates technical documentation and analyzes it taking into account the fact that one or more documents can be established in the technical regulation for which compliance management system certification.

The applicant provides production control and informs the certification body of management systems of all planned changes in the management system.

The applicant conducts testing of product samples. Tests of product samples are carried out in an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

The management system certification body carries out inspection control over the operation of the certified management system.

If the results of the inspection control are negative, the applicant makes one of the following decisions:

- suspend the validity of the declaration of conformity;

- cancel the declaration of conformity.

The applicant shall make an entry in the Unified Register of Issued Certificates of Conformity and Registered Declaration of Conformity issued in a single form.