已满18点从此进入在线通道_已满18点从此进入在线免费网站_大象传媒满十八勿秘密出口

实施工业安全专业证书/或工业安全结论知识的程序工业安全专业知识（ISE）是评估物体符合要求和工业安全标准的过程。

从2013年开始，俄罗斯政府已经取消RTN认证俄罗斯RTN安装使用许可证RosTechNadzor（RTN）的签发，取代他的是自愿性工业安全证书/工业安全结论
需要申请工业安全证书/结论的产品清单：
1) 、压力设备：压力超过0.07MPa，包括（蒸汽锅炉，蒸汽或燃气压力设备，蒸汽管道）或 热水温度超过115 摄氏度的（水锅炉，船舶，热水管道），热设备，热项目和供热网络、系统、仪表和保护的保护，报警及控制用的设备。 
2)、起重机械：（起重机，汽车起重机，电梯，缆车，升降机（塔），建筑吊笼，升降平台，残疾人自动扶梯等）。 
3)、天然气设备和天然气和技术设备，其中包括：燃气锅炉设备，燃气线路，燃气装置。 
4) 焊接设备：焊接，无损检测，堆焊，热处理及表面清理，有害场所使用的安装和维修的技术设备。 
5) 、I 类、II 类防爆电器和矿井电器设备。 
6) 采矿和开采及洗选设备：包括：黄金和钻石业专用设备，通风除尘设备，采矿的安装排雷设备，UPS 设备和矿山运输设备，打井设备，钻井，爆破设备和仪器仪表。 
7) 石油和天然气工业设备：包括用于生产井和深探井的钻井设备、钻机运输设备（运输整机、零部件、辅助工具、井下动力钻具）修井设备、压裂设备、油矿和地质勘探设备的工具。 
8) 地质及地球物理勘探设备 
9) 管线输送设备 
10) 在化工，石化，炼油及其他行业使用的设备和设施：有毒，侵略性和其他危险的环境中使 用的，包括电容，专栏，反应器，引擎，低温，真空，冷却，电解，传热过滤通风，干燥 和搅拌设备，火炉，保护系统和保护手段，报警及控制设备和其他设备。 
11) 蔬菜储存和加工危险技术装备。 
12) 有色金属冶金设备。 
13) 电炉和电感炉部件，电感加热装置：电弧炉和矿热炉，电阻炉和电阻加热设备，新类型加热器（熔炼和加热）。 
14) 铁矿冶炼设备。 
15) 呼吸器具：（绝缘呼吸器，救护车呼吸器），消除紧急情况下使用的气体监测仪器。 
16) 有害的工业场所使用的自动化设备：（控制装置和在监管过程中软件和技术的综合自动化 系统，机械和仪器测量机械及物理量，自动安全装置，煤气压力调节器，计数器）。 
17) 液体泵、真空泵，泵装置、空气压缩机、燃气压缩机。 
18) .燃气、易燃、有毒介质的储存罐车及储存罐。 
19) 管道及其管接头（钢铁，有色金属和合金，非金属材料）。 
20) 在危险场所使用的钢筋。 
21) 危险品交通运输设备。 
22) 金属结构件、支承件和保护罩。 
23) 气体回收设备，液体排放和污水处理设备。 
24) 爆炸材料和工业产品生产（制造）设备。

俄罗斯工业部门的后者在“联邦工业安全法”第1条第13,116段中有所描述和规范。与工业企业安全评估有关的任何工作的实施都有其特定的顺序和行动程序。因此，检查可分为几个有条件的阶段。

 1.申请。最初组织向客户解释验证的所有认证细节，给客户提供需要企业必须提供的文件信息要求。并且制定明确的认证时间表按照时间表进行工业安全检查。如果您有兴趣获得工业安全证书或结论，那么请联系我们

 2.准备申请文件包。客户必须按照要求提供所有必要的信息和所有要求的技术文档，否则无法完成工作。在这种情况下：通过文件资料表明哪些对象需要接受检查，并提供有关产品的所有必要信息;要进行认证产品的工业安全检查，组织必须提供必要的技术文件（在每种具体情况下，文件要求可能会根据要检查的对象不同而有所不同）。这可能包括：产品设计图纸，工程文档，各种法规指令，技术规范等;测试报告，任何产品证书，计算书 - 他们也可能是必要的;如有必要也可能要求提供样品检查。

工业安全检查的需要多长时间？客户总是会问这个问题。工业安全检查一般是只能通过检查所需的工作量来回答。换句话说，需要花费检查工业安全上的时间取决于产品的复杂程度。但无论如何，执行所有必要的检查认证活动不会超过三个月。

 3.开展工业安全检查（工业安全专业知识）：在此阶段，项目委员会任命专家（一人或多人）进行检查。之前由客户提供的所有信息都需要进行分析。所有文件，测量，计算等均符合法律规定的所有标准。为了确保检查所有必要的参数并确保所有这些数据符合工业安全要求，专家可以进行必要的测试、测量等检查工作。并最终根据开发的电子安全专业检查计划进行检查。为了实现工业安全检查，可以将专家送到安装使用现场进行检查，并且组建一个检查委员会，其中包括具有必要资格的组织员工。他们的检查工作会涉及：
他们评估生产管理过程;
评估制造商和管理团队的活动;
评估位于企业生产安装设施和设备的状况;
检查产品标签/铭牌;
检查注意技术和操作方法文件包（他们是否存在），
检查工艺文件和操作规范等;
检查设备的维修保养文档情况。

在考虑并验证了所有重要的细微差别之后，对它们进行了总结，完成工业安全审查所需技术要点与客户协商。 


4.工业安全证书/结论文件签发- 审查结束签发工业安全证书或工业安全结论。专家委员会根据检查数据对检查结果进行总结，并作出结论草案。在该结论文件中，会告诉制造商主要结论（合格或不合格）。客户收到上述草稿结论，应该做出回应。如果在审查之后全部合格，可以签发工业安全专业证书或结论。如果在执行安全和保安检查后发现有违规行为并且专家就不符合现有要求的问题得出结论，那么客户也会收到指示的文件。

Industrial Safety Certificate 

Examination of industrial safety (ESP) - assessment of the compliance of the object of examination with the requirements and standards of safe operation specified in federal norms and rules of industrial safety, as well as other documents of the Russian Federation on industrial safety. The result of the industrial safety expertise is the conclusion of the industrial safety expertise, which is registered in the Rosternadzor safety expertise list. Our company conducts industrial safety expertise based on Rostekhnadzor License No. DE-00-015471 dated July 3, 2015.

Examination: from 7 days
Registration of examination conclusion: up to 8 days
What industrial safety reviews are carried out

As of 10/20/2015, in accordance with clause 1 of Article 13 of the Federal Law No. 116 “On Industrial Safety ...” dated July 21, 1997, the expert organization may conduct the following types of examinations:
1. examination of industrial safety technical devices;
2. examination of industrial safety of buildings and structures;
3. examination of industrial safety of project documentation;
4. industrial safety expertise of the industrial safety declaration;
5. examination of the safety justification of hazardous production facilities.
The circle of persons interested in the examination of industrial safety

Examination of industrial safety is a mandatory procedure, which is carried out in accordance with Federal Law No. 116 "On Industrial Safety ..." dated July 21, 1997 and federal industrial standards and rules in the field of industrial safety only at enterprises that are classified as hazardous production facilities from hazard class. At these hazardous production facilities, industrial safety examinations are subject to: technical devices, buildings and structures, project documentation, industrial safety declaration, safety justification.

Legislatively determined in what cases and under what circumstances the need arises to conduct an examination of industrial safety: an accident, detection of a defect, completion of the regulatory period of safe operation, a decision of the Rostechnadzor inspector, technical re-equipment of the facility, and others, according to industrial safety regulations.

The need for an examination of industrial safety is decided individually, in relation to each specific case.
Stages of industrial safety expertise

The examination of industrial safety is carried out by an organization licensed by Rostekhnadzor to conduct an examination of industrial safety, which is in no way affiliated with an organization that owns or operates a hazardous production facility. Examination of industrial safety is carried out in accordance with the "Rules for the examination of industrial safety" approved by the Order of Rostechnadzor No. 538 dated 11/14/13 and the Administrative Regulation of Rostechnadzor for the provision of state services for maintaining a register of industrial safety expertise conclusions by Rostechnadzor No. 266 of 06.23.2014 year
The stages of the examination of industrial safety:

1. Preparation for conducting an industrial safety expertise - expert organization requests documentation on the object of examination, in accordance with the current legislation, namely:
- data on the object of examination;
- design, engineering, operational, repair documentation;
- declaration of industrial safety of HIF (if the examination of the declaration is carried out);
- passports, certificates, process regulations, test reports and other documentation for technical devices.

IMPORTANT: The examination of industrial safety is possible only after the expert organization has received the necessary documents and materials. This requirement does not apply to those devices and buildings for which the operational documentation has been lost or destroyed.

2. Conduction of industrial safety expertise - at this stage, the completeness and accuracy of information about the object provided by the customer is determined, as well as its compliance with federal standards and industrial safety rules.

Examination of industrial safety in case of need to inspect equipment and buildings is carried out on-site. In the process of going to the site, experts conduct observations on the process of work of the object of examination; carry out technical diagnostics by the method of non-destructive or destructive testing.

3. Issuance of the EAF conclusion - the expert organization draws up a draft expert opinion on industrial safety, containing conclusions about the object of examination, which specifies the period of further safe operation of the object of examination (applicable to buildings, structures and technical devices) and establishes whether the object of examination meets the requirements of industrial security. A copy of the draft endorsement of the industrial safety expertise is transmitted to the customer, who, within 14 days of receiving the draft, can send comments to the expert organization.